Colours
‍
Our joinery is finished in our dedicated spray facility using Teknos VOC-compliant, water-based paint systems, with four coats of microporous paint or stain to give them a flawless and enduring finish. We can offer several levels of factory coating:

Primed only
‍
Primer with one intermediate coat, ready for final finishing on site
‍
Fully factory finished four coats

Period windows and doors are available in a paint brush finish

We can match any colour from the Teknos colour chart, a selection of which is shown below. Contact us for a physical sample.

T7001 is our standard colour. Non-standard colours may carry an additional charge.
Custom Colours

Colours can be matched to manufacturer-specific palettes where a valid reference is provided. Specialist paint systems or bespoke colour references can also be accommodated for an additional charge.

A selection of frequently specified shades, shown here on our standard box sash profile, finished in the same bespoke colour internally and externally.
TEKNOS T2515
TEKNOS T7018
TEKNOS T7083
We can offer a ‘dual finish’ where different colours are desired internally and externally or a ‘mixed finish’ where frames are specified to be contrasting to sashes.
EXTERNAL: TEKNOS T7001
The outward-facing side of the window.
INTERNAL: TEKNOS T2515
The room-facing side can be finished in a different colour to the outside.
MULTI-FINISH: FRAME T2515, SASH T7001
Frame and sash can also be finished in two different colours.

Stains

Our stain finishes enhance the natural character of the timber, allowing the grain and tonal variation to remain visible. Deeper stain colours offer increased protection against UV exposure and are less prone to fading over time.

We can produce any colour from the Teknos Woodex range. The finishes shown are indicative of the available palette; physical samples can be provided on request. Final appearance will vary depending on the timber species selected.

‍Contact us for physical samples.